 |
 |
 |
 |
 |
 |
 |
 |
 |
Projects |
 |
 |
Project: Pulley of crushing-mill |
| Client: Excavation Lafontaine | |
| Description: Reweld the interior taper. Remachine new grooves for V belts. Outside diameter 48 inches. On site, reweld the taper shaft on the machine for a new taper fit and 2 keyway fit |
 |
Project: Screws of 12 feet |
| Client: A. Lacroix Granit | |
| Description: Fabrication of two screws of 12 feet for a gang saw (1 left hand thread and 1 right hand thread). 2 new nuts 12 inches long ACME thread. The screws raise and lower the table |
|
|
Project: Attachment for drilling machine Client: Hazmark Inc Description: To design and manufacture a machine adapting to a drilling machine and having an exit of drilling of 4 holes. |
|
|
Project: Moulding Machine |
| Client: Menuiserie East Angus | |
| Description: Design and manufacture of this machine in order to ensure a standard lenght and thickness |
 |
Project: Rubber roller depositing adhesive on doors |
| Client: Les Portes Lambton | |
| Description: Remachine rubber thread |
721,
Route 263, Lambton (Québec), G0M 1H0
Telephone :(418) 486-7747 - Fax: (418) 486-7067
Email : info@gre-mar.com
